hi,
i got 5525x A/S FW pair and can't seem to sync to standby FW.
i tried rebooting the standby FW but still the same.
suspect might be a bug but need someone's advise first or what troubleshooting i can further do, i.e. re-create failover config?
the bug i've searched:
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCui19504/?referring_site=bugquickviewredir
ciscoasa/sec/act# sh ve
Cisco Adaptive Security Appliance Software Version 9.1(3)
Device Manager Version 7.1(3)
Compiled on Mon 16-Sep-13 16:07 PDT by builders
System image file is "disk0:/asa913-smp-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 1 year 254 days
failover cluster up 1 year 259 day
ciscoasa/sec/act# sh run fail
failover
failover lan unit secondary <<< I'VE ADDED THIS TODAY AS PREVIOUS TECH FORGOT IT; NOT SURE IF THIS IS THE CULPRIT
failover lan interface folink GigabitEthernet0/7
failover link folink GigabitEthernet0/7
failover interface ip folink 192.168.7.1 255.255.255.248 standby 192.168.7.2
ciscoasa/sec/act# sh fail state
State Last Failure Reason Date/Time
This host - Secondary
Active None
Other host - Primary
Sync Config Comm Failure 02:41:03 UTC May 15 2017
====Configuration State===
Config Syncing
Sync Done - STANDBY
====Communication State===
============
ciscoasa/pri/stby# sh ve
Cisco Adaptive Security Appliance Software Version 9.1(3)
Device Manager Version 7.1(3)
Compiled on Mon 16-Sep-13 16:07 PDT by builders
System image file is "disk0:/asa913-smp-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 12 hours 50 mins <<< TRIED TO REBOOT BUT STILL HAVE SYNC ERROR
failover cluster up 12 hours 50 mins
ciscoasa/pri/stby# sh run fail
failover
failover lan unit primary
failover lan interface folink GigabitEthernet0/7
failover link folink GigabitEthernet0/7
failover interface ip folink 192.168.7.1 255.255.255.248 standby 192.168.7.2
ciscoasa/pri/stby#
Unable to sync configuration from Active <<< KEEP GETTING THIS ERROR
.
Detected an Active mate
ciscoasa/pri/stby# sh fail state
State Last Failure Reason Date/Time
This host - Primary
Sync Config None
Other host - Secondary
Active None
====Configuration State===
====Communication State===
ciscoasa/pri/stby# sh fail hist
==========================================================================
From State To State Reason
==========================================================================
03:16:43 UTC May 16 2017
Negotiation Cold Standby Detected an Active mate
03:16:45 UTC May 16 2017
Cold Standby Sync Config Detected an Active mate
03:18:47 UTC May 16 2017
Sync Config Negotiation HA state progression failed
03:18:48 UTC May 16 2017
Negotiation Cold Standby Detected an Active mate
03:18:50 UTC May 16 2017
Cold Standby Sync Config Detected an Active mate
03:20:52 UTC May 16 2017
Sync Config Negotiation HA state progression failed
