cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2682
Views
0
Helpful
3
Replies

asa and scp

Yves-Buecking_2
Beginner
Beginner

How do I use scp with my asa to copy the running-config to a linux device ?

Thanks

3 Replies 3

khinze
Beginner
Beginner

Since this was posted in '06, has no one else had this question? I can scp files to the ASA and can even scp files from disk0 on the ASA to/from a linux box. I cannot however figure out how to grab system:running-config to get the config the same way you would from a tftp. This is for backup purposes to replace tftp.

As I mentioned in my earlier post, you could setup a VPN between the ASA|PIX and the Server running the TFTP daemon to secure the communication, I would give it a try. You can use transport mode for this purpose for minimal overhead.

Regards

Farrukh

Here's what I do:

When logged into an ASA via ssh, I run

asa# copy run filename.txt

Then, I scp the file down to my local machine by running

linux$ scp user@sf-fw-loc2.domain.com:filename.txt .

 

TIP: If I have used tftp before on the respective ASA, the filename I could use will be in 'sh run tftp':

asa# sh run tftp
tftp-server inside 10.0.0.21 sf-fw-loc2.txt

My tftp config line will have identifying information in the filename, e.g. ny-fw-loc1.txt, so that I can know which firewall the config is from when I need to restore a file. The filename you create is arbitrary.

 

TIP: By utilizing ssh keys, you could achieve these scp transfers without passwords. By not using passwords, you could also automate the download process using cron.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: