- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-19-2015 07:41 AM - edited 03-11-2019 11:46 PM
hi all
brief diagram:
PE ROUTER <> ASA <> INTERNET ROUTER <> ISP
we got an ASA 5525X using version 9.1.2 running security context. the ADMIN context is running a site-to-site IPsec VPN backup tunnel to our HQ.
when I created a new context (for static NAT and PAT) and put a nameif (i put 'outside'), it caused an outage towards our internet facing router.
outage meaning, ping from our management server and solarwinds NMS is dropped towards our internet router (TACACS was cut as well).
i tried using another public IP and other nameif (like outside1), also created ACL to allow management traffic towards the internet router but still the same.
when i removed the outside interface from system context, everything goes back to normal
is there a command that i might missed? or bug?
Solved! Go to Solution.
- Labels:
-
NGFW Firewalls
Accepted Solutions

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-21-2015 07:16 AM
Hi,
If you are sharing physical interface for outside in these context, please check if you are using 'mac-address auto'
Regards,
Akshay Rastogi

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-21-2015 07:16 AM
Hi,
If you are sharing physical interface for outside in these context, please check if you are using 'mac-address auto'
Regards,
Akshay Rastogi
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-21-2015 08:05 AM
hi,
you're right on the money!
this is already been fixed few days ago using the said command.
