10-31-2011 03:35 AM - edited 03-11-2019 02:44 PM
Hi All
I am trying to change the ASDM listening port number within a context but getting the following error:
DMZwebcon(config)#http server enable 444
^
ERROR: % Invalid Hostname
Is this commad only available in the admin/system context or a software issue???
Any help welcome
Regards MJ
Solved! Go to Solution.
10-31-2011 03:21 PM
Hi MJ,
Please refer to
To enable the adaptive security appliance HTTP server, use the http server enable command in global configuration mode. To disable the HTTP server, use the no form of this command.
http server enable [port]
The HTTP server is disabled.
The following table shows the modes in which you can enter the command:
Command Mode | Firewall Mode | Security Context | |||
---|---|---|---|---|---|
Routed | Transparent | Single | Multiple | ||
Context | System | ||||
Global configuration | • | — | • | — | — |
Located at
http://www.cisco.com/en/US/docs/security/asa/asa82/command/reference/gh.html#wp1781150
Basically, since the VPN functionality is lost when you pass to multiple context, there is no real need to change the default SSL port on the ASA, hence the command is not supported on that specific mode.
Let me know if you have any further questions.
Mike
10-31-2011 03:21 PM
Hi MJ,
Please refer to
To enable the adaptive security appliance HTTP server, use the http server enable command in global configuration mode. To disable the HTTP server, use the no form of this command.
http server enable [port]
The HTTP server is disabled.
The following table shows the modes in which you can enter the command:
Command Mode | Firewall Mode | Security Context | |||
---|---|---|---|---|---|
Routed | Transparent | Single | Multiple | ||
Context | System | ||||
Global configuration | • | — | • | — | — |
Located at
http://www.cisco.com/en/US/docs/security/asa/asa82/command/reference/gh.html#wp1781150
Basically, since the VPN functionality is lost when you pass to multiple context, there is no real need to change the default SSL port on the ASA, hence the command is not supported on that specific mode.
Let me know if you have any further questions.
Mike
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide