10-08-2010 09:52 AM - edited 03-11-2019 11:52 AM
Hi,
I have two asa's and would like to set up a trap in Orion to send an email when the pair failsover. Could someone please tell me what the trap would look like or what I should be trapping on?
Thank you.
Solved! Go to Solution.
10-08-2010 01:13 PM
I meant command "snmp-server enable traps [all | syslog".
But if you want to receive an email for every failover event you don't need to use SNMP. You can send the syslog id I mentioned as an email as shown here http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/monitor_syslog.html#wp1064823
Please mark this thread as solved if it solves your issue so that others can benefit in the future.
Rgs,
PK
10-08-2010 10:14 AM
Unfortunately there are no traps for failover events.
But you can send syslog traps and look for trap that has syslog ASA-1-104002 in it.
I hope it helps.
PK
10-08-2010 11:30 AM
How would I set up syslog traps to send email notifications?
Thank you for all of your help.
10-08-2010 01:13 PM
I meant command "snmp-server enable traps [all | syslog".
But if you want to receive an email for every failover event you don't need to use SNMP. You can send the syslog id I mentioned as an email as shown here http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/monitor_syslog.html#wp1064823
Please mark this thread as solved if it solves your issue so that others can benefit in the future.
Rgs,
PK
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide