cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1898
Views
5
Helpful
3
Replies

ASA FTD: FDM vs CLI

GrDragon
Level 1
Level 1

Hi Guys,Please i just want to know if:

Can we use IPS with FDM ?

Can we configure Etherchannel and IPS from CLI of the ASA FTD ?

1 Accepted Solution

Accepted Solutions

Hi,
Yes, IPS is configured within FDM. No, you cannot configure etherchannel or IPS from the CLI of the ASA FTD. You only configure the mgmt interface on the cli, the FDM or FMC must be used to configure everything else (including the external/internal interfaces).
HTH

View solution in original post

3 Replies 3

Hi,
Yes, IPS is configured within FDM. No, you cannot configure etherchannel or IPS from the CLI of the ASA FTD. You only configure the mgmt interface on the cli, the FDM or FMC must be used to configure everything else (including the external/internal interfaces).
HTH

And since the Etherchannel cannot be configured from FDM the FMC is Required?

Looks like as of 6.2.2 etherchannel is not configurable in FDM, it is if you use FMC though.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: