cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1609
Views
0
Helpful
3
Replies

ASA has messages log in denied from CSM to ASA

mahesh18
Level 6
Level 6

Hi Everyone,

Since i added ASA   to csm 4.3  our syslog server always see the message  message

: Login denied from x.x.x.x/56432 to inside y.y.y.y/https.or user ""

where x   is csm server ip

y is fw interface ip.

And after this message just after few secs i can see the CSM   has successfully log to cisco ASA.

Need to know why i get this message with blank usernam

Regards

Mahesjh

Message was edited by: mahesh parmar

1 Accepted Solution

Accepted Solutions

Marvin Rhoads
Hall of Fame
Hall of Fame

Perhaps one of your credentials (configuration manager, right click on firewall in question and choose Device properties, credentials and double check both login and enable credentials) is incorrect.

View solution in original post

3 Replies 3

Marvin Rhoads
Hall of Fame
Hall of Fame

Perhaps one of your credentials (configuration manager, right click on firewall in question and choose Device properties, credentials and double check both login and enable credentials) is incorrect.

Hi MArvin,

I checked under --configuration manager, right click on firewall in question and choose Device properties, credentials

Under Primary Credentials username,password  and enable password are the same.

Also below that   under

HTTP  Credentials

Use PRimary Credentials is checked.

Do i have to  config Credentials  under Polices window,platform,credentials also?

Regards

MAhesh

Hi MArvin,

Under Polices

Platform

Device admin

Credentials

username and password are blank  also there it has enable password that is different from the one entered  under --

configuration manager, right click on firewall in question and choose Device properties, credentials?

Regards

mahesh

Review Cisco Networking for a $25 gift card