cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3196
Views
0
Helpful
2
Replies

ASA Inbound Dual-ISP Failover Configuration

pootboy69
Level 1
Level 1

We have dual ASA5510s and dual ISPs (100MB fiber & DSL backup).  Can I configure INBOUND link failover to the ASAs, probably using either EIGRP or OSPF, without requiring the the ISP to add the corresponding protocols on the interfaces facing us?  I realize that I can add two "internal" routers and configure these protocols but would like not having to add complexity to the system.  Thanx!

2 Replies 2

andrew.prince
Level 10
Level 10

A simple solution would be an IP SLA attached to a default route via ISP1.  If the IP SLA fails another default route via ISP2 takes over.

HTH>

francisco_1
Level 7
Level 7

You could use static route tracking feature on the ASA Series Security Appliance.

see this http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtml

Francisco

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: