ASA Link To StackWise Pair

[zekebashi]

Hello,

Ref. diagram attached. 

Focusing on the ASA uplinks and downlinks to a pair of C9500 switches which are configured in a StackWise Virtual mode. The two physical ports on the ASA will be bundled into a L3 Port-Channel. From the ASA, each physical port will be connected to switch A and the other physical port will be connected to switch B in the stackwise domain. I was wondering if this design would work from the ASA stand-point. Meaning, can an ASA configured in a port-channel have one port connected to a switch and the other port connected to another switch considering that the switches are configured in a visualized mode (SV or VSS)?

Thanks in advance.

Best, ~zK

[Marvin Rhoads · Accepted solution]

Yes - we can do a portchannel from ASA to multiple downstream switches that are configured as Stackwise, Stackwise Virtual, VSS or Nexus vPC