I have two ASA 5520s in Active/Standby. I try and test this quartely to ensure it is working correctly. Everything works fine, except I have an issue with one interface. When doing a show failover, it shows the interface as failed on the secondary unit, and I am not sure why. It shows it as normal on the primary. Has anyone else had experience this, or can guide me in the right direction to resolve it.
This host: Primary - Active
Active time: 9277305 (sec)
slot 0: ASA5520 hw/sw rev (2.0/8.2(4)) status (Up Sys)
Interface WaterworksCanopy (192.x.x.x): Normal
slot 1: ASA-SSM-4GE hw/sw rev (1.0/1.0(0)10) status (Up)
Other host: Secondary - Failed
Active time: 0 (sec)
slot 0: ASA5520 hw/sw rev (2.0/8.2(4)) status (Up Sys)
Interface WaterworksCanopy (192.x.x.x): Failed (Waiting)