Network Security

                   Hi everyone,I am trying to download drivers from HP website for a printer.Traffic goes via ASA  to the Internet.I need to rule out if ASA is blocking  or not.Here is what i did http://h20000.www2.hp.com/bizsupport/TechSupport/Softw...

I've got a PIX running 7.2(4) with its outside interface on the Internet.  The only thing this PIX is doing is acting as the endpoint for an IPSEC LAN-to-LAN tunnel with an Internet-connected ASA on another network.I'd like to filter inbound Internet...

Hello, I have 3 ASA 5510s; two of which are in production and the 3rd one is new. I inherited the two in production and was trying to configure that 3rd one using some of the existing object-group network statements.  The problem is that when I try t...

                   I have two ASA5545-X with HA license Active/Active and now my customer has changed the designe and wants to split these up into standalone firewalls.  How does this affect the license?  Is there any issue with doing this, or will t...

                  Client is changing ISPs'. They currently have a x.x.x.x/28 network and they are using 10 of the available IPs'. The new provider wants to give them a /30 network, 1 IP for the Outside interface and the other will be their equipment,...

Hi everyone,Say i got a 5505 or a 5510 with a security + license. Now let's assume that there is an 8.2 OS version that i want to upgrade to 9.x. Is it going to kill my security + License? If yes is it lost for good or can I get a new key for 0$?I am...

Good day all,short question....I setup a new ASA for our branch office everything is working fine. But I have a little problem with the ASA.I try to configure that my ASA in the branch office can resolve internal host to IP. Problem is that our inter...

Hi,We have cisco asa 5505 series ulbunk8 and can you please tell me if it is possible to upgrade it to k9???If yes could you please tell me what steps should be taken.Thank you.

I have inherited an asa 5510 whit 4GE SSM module installed. The asa runs fine, but i can not use the 4GE SSM ports. Using  ASDM or console i can get and configure the gigabitethernet1/x ports but i can not get traffic on it.The ping from the console ...

Hi Guys,I have ASA 5515x and it has already Internet Connection since my firewall is not "production". So right now I'm trying to configure a Remote Session just for a test and eventually I was not able to connect from it. I followed the instructions...