cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 
cancel
602
Views
0
Helpful
1
Replies

ASA Software for ASA5512-X with FirePOWER Services for Management with ASDM

emlucca
Level 1
Level 1

I am upgrading an ASA5512-X CX with system image file disk0:/asa914-smp-k8.bin, for an ASA5512-X with FirePOWER Services.

I will manage it using ASDM, rather than use the FirePOWER Management Center.

What kind of image I have to use, .bin file (asa952-smp-k8.bin) or .SPA file (asa952-14-lfbff-k8.SPA)?

On the page of Cisco ASA5512-X with FirePOWER Services (http://www.cisco.com/c/en/us/support/security/asa-5512-x-firepower-services/model.html#~tab-downloads) there isn't none link to ASA OS Software, only FirePOWER Services Software for ASA and Firepower Threat Defense Software.

1 Reply 1

Jetsy Mathew
Cisco Employee
Cisco Employee

Hello,

If you already have an ASA running with CX module, please refer the following link and uninstall the existing CX module.If your ASA version is not compatible with the Firepower integration you can upgrade the ASA version . All the OS images will be available in the Cisco website software downloads sections.

http://www.cisco.com/c/en/us/support/docs/security/asa-firepower-services/118644-configure-firepower-00.html

Once its uninstalled integarte the Firepower module using the .pkg and .img files for installation. 

You can access all the image files from the Cisco Software downloads section. 

https://software.cisco.com/portal/pub/download/portal/select.html?&mdfid=286259687&softwareid=286271056

Rate and mark correct if the post helps you 

Regards

Jetsy 

Review Cisco Networking for a $25 gift card