04-05-2012 07:43 AM - edited 03-11-2019 03:51 PM
Hi,
I work in a company, and recently we bought a firewall ASA5505-50-BUN-K9.
Normally, this firewall support up to 50 users connected with VPN, and it support 3DES/AES.
But, when i check this features using show version command, i get:
ciscoasa# show version
Cisco Adaptive Security Appliance Software Version 8.3(2)
Device Manager Version 6.3(2)
Compiled on Fri 30-Jul-10 20:17 by builders
System image file is "disk0:/asa832-npe-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 2 days 1 hour
Hardware: ASA5505, 512 MB RAM, CPU Geode 500 MHz
Internal ATA Compact Flash, 128MB
BIOS Flash M50FW016 @ 0xfff00000, 2048KB
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.06
0: Int: Internal-Data0/0 : address is e8b7.4836.9f54, irq 11
1: Ext: Ethernet0/0 : address is e8b7.4836.9f4c, irq 255
2: Ext: Ethernet0/1 : address is e8b7.4836.9f4d, irq 255
3: Ext: Ethernet0/2 : address is e8b7.4836.9f4e, irq 255
4: Ext: Ethernet0/3 : address is e8b7.4836.9f4f, irq 255
5: Ext: Ethernet0/4 : address is e8b7.4836.9f50, irq 255
6: Ext: Ethernet0/5 : address is e8b7.4836.9f51, irq 255
7: Ext: Ethernet0/6 : address is e8b7.4836.9f52, irq 255
8: Ext: Ethernet0/7 : address is e8b7.4836.9f53, irq 255
9: Int: Internal-Data0/1 : address is 0000.0003.0002, irq 255
10: Int: Not used : irq 255
11: Int: Not used : irq 255
Licensed features for this platform:
Maximum Physical Interfaces : 8 perpetual
VLANs : 3 DMZ Restricted
Dual ISPs : Disabled perpetual
VLAN Trunk Ports : 0 perpetual
Inside Hosts : 50 perpetual
Failover : Disabled perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Disabled perpetual
SSL VPN Peers : 2 perpetual
Total VPN Peers : 10 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
AnyConnect Essentials : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
This platform has a Base license.
Serial Number: xxxxxxxx(hiden by me)
Running Permanent Activation Key: xxxxxxxx(hiden by me)
Configuration register is 0x1
Configuration last modified by enable_15 at 14:54:06.879 CET Tue Apr 3 2012
Can someone please explain me this, it's very important.
Please forgive me for my englich writing.
Houari.
Regards.
03-30-2017 11:16 AM
It worked! Thank you! I copied the ASA image and asdm file from the ASA that I will be replacing and 3DES-AES is now enabled. Thank you for your help!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide