OK. I know that I am missing something simple here.
I am trying to get an ASA5505 running IOS 9.1(4) with a base license to work with dual ISP's. My configuration looks good but the SLA command is in a constant state of failure.
The only thing I have noticed is that I am not able to ping ANY outside addresses directly from the ASA5505. All of my inside traffic can ping everything.
I did a capture and I can see the pings to the monitored IP address going out and coming back (echo and echo-reply).
Here is my (redacted) configuration:
ASA Version 9.1(4)
!
hostname ########
domain-name ############
enable password ################# encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ################# encrypted
names
!
interface Ethernet0/0
description ##############
switchport access vlan 10
!
interface Ethernet0/1
description ####### Modem
switchport access vlan 20
!
interface Ethernet0/2
description ######## Modem
switchport access vlan 21
!
interface Ethernet0/3
shutdown
!
interface Ethernet0/4
shutdown
!
interface Ethernet0/5
shutdown
!
interface Ethernet0/6
shutdown
!
interface Ethernet0/7
shutdown
!
interface Vlan10
description ###### Internal Network
nameif Inside
security-level 100
ip address 192.168.1.1 255.255.255.0
!
interface Vlan20
description ########## Internet
nameif Outside
security-level 0
ip address 1.1.1.1 255.255.255.252
!
interface Vlan21
description ########## Internet
no forward interface Vlan20
nameif Backup
security-level 0
ip address 2.2.2.2 255.255.255.252
!
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
dns server-group DefaultDNS
domain-name #########
same-security-traffic permit intra-interface
object network Internet1
subnet 192.168.1.0 255.255.255.0
object network Internet2
subnet 192.168.1.0 255.255.255.0
no pager
logging enable
logging asdm informational
mtu Inside 1500
mtu Outside 1500
mtu Backup 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit 192.168.1.0 255.255.255.0 Inside
asdm image disk0:/asdm-715-100.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
!
object network Internet1
nat (Inside,Outside) dynamic interface
object network Internet2
nat (Inside,Backup) dynamic interface
route Outisde 0.0.0.0 0.0.0.0 1.1.1.2 1 track 10
route Backup 0.0.0.0 0.0.0.0 2.2.2.1 254
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
aaa authentication enable console LOCAL
http server enable
http server idle-timeout 15
http server session-timeout 60
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sla monitor 10
type echo protocol ipIcmpEcho 8.8.8.8 interface Outside
num-packets 3
frequency 10
sla monitor schedule 10 life forever start-time now
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
!
track 10 rtr 10 reachability
telnet timeout 5
ssh timeout 15
ssh version 2
ssh key-exchange group dh-group1-sha1
console timeout 0
management-access Inside
dhcpd address 192.168.1.200-192.168.1.250 Inside
dhcpd dns 8.8.4.4 8.8.8.8 interface Inside
dhcpd lease 43200 interface Inside
dhcpd domain ######### interface Inside
dhcpd enable Inside
!
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
ntp server 64.90.182.55
ntp server 132.163.4.101
ntp server 64.147.116.229
ntp server 216.171.120.36
username ######## password ######## encrypted
username ######## password ######## encrypted
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp error
inspect icmp
inspect http
!
service-policy global_policy global
prompt hostname context
hpm topN enable
Cryptochecksum:a33435f31fadbd49db2a307f6e838ce6
: end
sh sla monitor configuration
SA Agent, Infrastructure Engine-II
Entry number: 10
Owner:
Tag:
Type of operation to perform: echo
Target address: 8.8.8.8
Interface: Outside
Number of packets: 3
Request size (ARR data portion): 28
Operation timeout (milliseconds): 5000
Type Of Service parameters: 0x0
Verify data: No
Operation frequency (seconds): 10
Next Scheduled Start Time: Start Time already passed
Group Scheduled : FALSE
Life (seconds): Forever
Entry Ageout (seconds): never
Recurring (Starting Everyday): FALSE
Status of entry (SNMP RowStatus): Active
Enhanced History:
sh sla monitor operational-state
Entry number: 10
Modification time: 11:22:18.200 CDT Tue Oct 20 2015
Number of Octets Used by this Entry: 1660
Number of operations attempted: 251
Number of operations skipped: 0
Current seconds left in Life: Forever
Operational state of entry: Active
Last time this entry was reset: Never
Connection loss occurred: FALSE
Timeout occurred: TRUE
Over thresholds occurred: FALSE
Latest RTT (milliseconds): NoConnection/Busy/Timeout
Latest operation start time: 12:03:48.194 CDT Tue Oct 20 2015
Latest operation return code: Timeout
RTT Values:
RTTAvg: 0 RTTMin: 0 RTTMax: 0
NumOfRTT: 0 RTTSum: 0 RTTSum2: 0
