cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1441
Views
0
Helpful
7
Replies

ASA5505 License Question

I have a spare ASA5505 w/Base License that we want to use as the router/firewall between our wi-fi network and our secondary internet connection. Currently we have a NetGear box as the router there and it is on its last legs.  In order for the ASA w/Base license to be able to issue over 150 IP address via DHCP which license do I need to purchase for it.

Thanks in advance.

1 Accepted Solution

Accepted Solutions

You have to do it with two separate licenses:

ASA5505-SW-10-UL (10 to unlimited upgrade)

ASA5505-SEC-PL=

If these codes are preceded by 'L' it means electronic license delivery instead of a physical shipment.

Note the distinction from the ASA 5505 Sec Plus 'bundle' that incudes the hardware as well as the unlimited license (ASA5505-SEC-BUN-K9)

View solution in original post

7 Replies 7

JORGE RODRIGUEZ
Level 10
Level 10

Ronald,

If you are trying to have ASA  to act as a DHCP server  you need Security plus license ,  the base license will not provide  anthing over 128 addresses based on your user license where you can retreave by doing " show version " 

To help you understand how to read license off the firewall  in your current firewall the   output of " show version"  shoudl tell you how many inside hosts , if it saids  10 users   then the DHCP feature will be limited to 32 hosts,  if  show version saids 50 users  DHCP will be limited to 128 hosts..

http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/d2.html#wp1904997

Best is to aquire the SEC PLUS license  where the DHCP feature will be a complete /24   network..

Regards

Jorge Rodriguez

Would this license do the same thing since it is cheaper than the Sec Plus.

http://www.cdw.com/shop/products/Cisco-ASA-5505-Software-license/1672222.aspx

A Sec Plus license on its own will NOT upgrade the users; it will convert your box into a 10-user Sec Plus, still with 32 DHCP clients maximum.

See Table 1 at

http://www.cisco.com/en/US/customer/docs/security/asa/asa84/license/license_management/license.html

An unlimited user license should allow you to have the maximum 250 DHCP clients, but it will still be a base license model unless you also add Sec Plus.

Does anyone have the PN for SecPlus w/ unlimited license for the ASA5505.

You have to do it with two separate licenses:

ASA5505-SW-10-UL (10 to unlimited upgrade)

ASA5505-SEC-PL=

If these codes are preceded by 'L' it means electronic license delivery instead of a physical shipment.

Note the distinction from the ASA 5505 Sec Plus 'bundle' that incudes the hardware as well as the unlimited license (ASA5505-SEC-BUN-K9)

Thank you very much. I think we will go with just the 10 to Unlimited for now. We don't need the other features the sec plus offers.

Good luck with the upgrade.

Page 10 of this pdf, http://www.cisco.com/web/tsweb/edelivery/pilot/SKUS.pdf

gives the full SKUs for the various licenses.

Review Cisco Networking for a $25 gift card