06-19-2013 01:19 PM - edited 03-11-2019 07:00 PM
First, I have little to no knowledge of firewalls and these types of devices.
I did folllow the setup wizard and everything appears to be fine at the completion. However; something is not correct or missing. I have no internet access when connected to this device. I cannot ping or run a tracert in addition to no internet access.
I have noticed several different messages in the log as I attempt each of the above commands.
Here are a few of the messages:
- Failed to locate egress interface for UDP from inside...
- Routing failed to locate the next hop for ICMP from NP Identity....
- Deny TCP (no connection) from 192.168.1.6/2899 to 192.168.1.1/443...
I have provided my config. It looks pretty basic to me with no big options.
Thanks for any help!
Kevin
Solved! Go to Solution.
06-19-2013 01:36 PM
Hi Kevin,
The dafault route us missing from config.
with the below config i am sure that you have a static ip address from isp.
------------------
interface Vlan2
nameif outside
security-level 0
ip address 173.190.xxx.xxx 255.255.255.252
-----------------
we need to add a default route to the next hop unit(isp unit).
for eg -- route outside 0 0 173.190.x.x 1 // we specifying that unknown destination based traffic should be left to next hop 173.190.xx.xx.
Let me know how it goes.
Regards,
Jesu Kumar Bose
06-19-2013 01:36 PM
Hi Kevin,
The dafault route us missing from config.
with the below config i am sure that you have a static ip address from isp.
------------------
interface Vlan2
nameif outside
security-level 0
ip address 173.190.xxx.xxx 255.255.255.252
-----------------
we need to add a default route to the next hop unit(isp unit).
for eg -- route outside 0 0 173.190.x.x 1 // we specifying that unknown destination based traffic should be left to next hop 173.190.xx.xx.
Let me know how it goes.
Regards,
Jesu Kumar Bose
06-19-2013 01:47 PM
OK, so I feel stupid.
Thanks a bunch for the help Jesu!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide