ASA5505 upgrade from asa9.1.2/asdm7.1.3 to asa9.1.3/asdm7.1.4 no ASDM login

[bernhardsigl]

Hi,

I have following problem after upgrading a ASA5505 from asa9.1.2/asdm7.1.3 to asa9.1.3/asdm7.1.4.

When I launch ASDM after upgrading and login with my credentials asdm keeps prompting for a password and dont let me in.

I have testet a few tasks but still can't login via asdm.

What I have made:

crypto key zerosize rsa modules

crypto key generate ras modules 2048

http server enable

http xxx.xxx.xxx.xxx 255.255.255.0 inside

asdm image disk0:/asdm-714.bin

ASDM Java Version is 7 Update 45

If I go back to asa9.1.2/asdm7.1.3 everythink work

Thanks a lot

[Marius Gunnerud]

do you also have the following command in your configuration:

aaa authentication http console LOCAL

[bernhardsigl]

Hi marius,

yes I have.

Sent from Cisco Technical Support iPhone App

[Marius Gunnerud]

What version of Java are you running on your PC?  You might want to try upgrading it...or perhaps even downgrading it.  I know that ASDM has issues with some versions of Java.

[bernhardsigl]

Hi marius,

7 update 45 have also tried a old 6 on a xp vm. But without success

Sent from Cisco Technical Support iPhone App

[Marius Gunnerud]

Does the asdm 7.1.3 work with ASA 9.1.3?  If so, it sounds a lot like a bug.

[bernhardsigl]

Oh no it was my fault.

On this ASA I haven't configured a local account only the enable user with password and this won't work with the new asa and asdm image ...

Thanks a lot for your help marius!

[bernhardsigl]

I haven't tried but I will test it tomorrow

Sent from Cisco Technical Support iPhone App