ASA5506-SEC-BUN-K9 license

[Augenia]

I have a Cisco firewall with Security License bundle,
Part number:  ASA5506-SEC-BUN-K9

I need to set up 30 remote access users using the Anyconnect VPN client.
Does ASA5506-SEC-BUN-K9 include the Anyconnect VPN client license?

If not, which license pack do I need to purchase? I'd prefer to get the
one-time purchase license instead of the yearly subscription license pack.

According to the following link:
https://www.cisco.com/c/en/us/support/security/asa-5506-x-firepower-services/model.html#~tab-specs

It shows,
Maximum Cisco AnyConnect IKEv2 remote access VPN or clientless VPN user sessions
2 / 50

[Marius Gunnerud]

You will need to purchase either the Plus or Apex license.  By default the ASA allows for two AnyConnect connections.  Anything more than that will require licenses.

Have a look at this ordering guide. It might give you some insight into what you are looking for:

https://www.cisco.com/c/dam/en/us/products/security/anyconnect-og.pdf

[Augenia]

Thanks for your reply.

So there is no point to get ASA5506-SEC-BUN-K9 (with security license) then?

Should have just purchased ASA5506-K9 instead.

I thought ASA5506-K9 comes with two AnyConnect connections and

ASA5506-SEC-BUN-K9 with Security License would increase  AnyConnect Connections to 50 according to the following link:

https://www.cisco.com/c/en/us/support/security/asa-5506-x-firepower-services/model.html#~tab-specs

Maximum Cisco AnyConnect IKEv2 remote access VPN or clientless VPN user sessions
2 / 50