ā12-03-2018 11:33 PM - edited ā02-21-2020 08:32 AM
Hi everyone
this the first time for me to configure ASA5506-X in cli and
i want to configure EZVPN client mode in this device
i have 2 questions:
1- when i did (sh running configuration & sh crypto ca certificates )why i couldn't find any certification ????
2- asdm is not working although the image is already exist ????
and i did configure interface GigabitEthernet1/1
nameif outside
security-level 0
ip address dhcp setroute
!
interface GigabitEthernet1/2
nameif inside
security-level 100
ip address 192.168.1.100 255.255.255.0
ā12-04-2018 12:46 AM - edited ā12-04-2018 12:47 AM
Hi
give your ASA's Inside interface next hop IP that should be in the range of 192.168.1.x
route inside 172.16.20.7 255.255.255.255 192.168.1.x
HTH
Abheesh
ā12-04-2018 12:49 AM - edited ā12-04-2018 12:49 AM
Thanks for your reply but i don't want to do that because it's customer device
i should only access to device and configure it then deliver it to customer and i want to do that via asdm
because it's easer to configure EZVPN in GUI
ā12-04-2018 12:52 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide