cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1007
Views
0
Helpful
3
Replies
babiojd01
Beginner

ASA5506x 9.8.1 routed mode management access inside with bvi

I cannot ssh to the inside of the asa via vpn when the inside ip is a BVI. I enabled management access inside and i received tcp intercept drops my connection. If I enable management access via a specific interface like inside_1->inside_7 i get cannot locate egress interface. How do you enable management access inside when using a BVI inside interface using 9.8.1 code?

3 REPLIES 3
Dennis Perto
Contributor

It would seem that others are experiencing the same behavior.

https://supportforums.cisco.com/discussion/13266856/version-971-bvi-not-available-permit-mgmnt-access

Thanks Dennisperto,

I hope cisco can come back and state is it behavior or is it not possible? I see nothing in the documentation that says it isn't and if it isn't why can we execute the command? The error I get while watching asdm log is tcp intercept. I don't even have that enabled. In order to get access to the asdm I used the outside interface and created a pat for the firepower module so I could reach that as well.

greenfox878
Beginner

del