01-14-2016 12:59 PM - edited 03-12-2019 05:52 AM
I followed this process Install and Configure a FirePOWER Services Module on an ASA Platform on a 5512-X with CX module and it all works until I get to the "sw-module module sfr recover boot". I get "Storage device not found. Install drive and try again".
I have ~3.6GB free on the SSD. Although it's supposed to be a 120GB SSD as it was ordered as ASA5512-SSD120-K9
sh file system
File Systems:
Size(b) Free(b) Type Flags Prefixes
* 4118732800 3893551104 disk rw disk0: flash:
- - disk rw disk1:
- - network rw tftp:
- - opaque rw system:
- - network ro http:
- - network ro https:
- - network rw scp:
- - network rw ftp:
- - network wo cluster:
- - stub ro cluster_trace:
- - network rw smb:
01-18-2016 08:42 AM
Hi David,
You need to uninstall CX module before booting up the image for SFR.
Let me know if you have any further questions.
Thanks,
Ankita
01-19-2016 01:03 PM
Hi,
Check :http://www.cisco.com/c/en/us/support/docs/security/asa-firepower-services/200283-Migration-from-the-Legacy-IPS-or-CX-to-t.html
Regards,
Aastha Bhardwaj
Rate if that helps!!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide