03-20-2014 11:29 AM - edited 03-11-2019 08:58 PM
Hello
I have a Guest wireless network running through an ASA5515x that has no access to internal services.
I have implemented the following in hopes to allow traceroute thru but when I run from cmd, no hops reported. * * *!!!
access-group Guest_Wireless_access_in in interface outside
access-list Guest_Wireless_access_in extended permit icmp any any echo-reply
access-list Guest_Wireless_access_in extended permit icmp any any unreachable
access-list Guest_Wireless_access_in extended permit icmp any any time-exceeded
Please review and advise.
Solved! Go to Solution.
03-20-2014 11:51 AM
03-20-2014 01:37 PM
03-20-2014 11:51 AM
03-20-2014 01:32 PM
Bimajumd
Thank you for the reply.
Is there a difference between the Pix 500 and an ASA5515x for this type of config?
03-20-2014 01:37 PM
03-20-2014 01:57 PM
Hello
Just to make sure i follow you
I am on inside of network behind ASA with a 192.168 x.x address and I am trying to issue tracert from my command line to youtube and I get all * * *.
This doc looks like it discusses being on outside and trying to traceroute to asa
03-20-2014 03:03 PM
Take a look at this guide.
http://www.packetu.com/2009/10/09/traceroute-through-the-asa/
03-20-2014 05:39 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide