1.) Looking at the network mask used in the interface it seems that the standby IP address is configured wrong. Also, there is not supposed to be any configurations related to the standby IP address. I mean no NAT configurations or access-list statements as its just there for the Failover to work. (To my understanding)
2.) What you should do is configure another IP from the same network range as the primary IP. When you change the standby IP address you naturally only configure it on the active device as the standby device automatically receives the configuration change from the primary device (provided that the actual failover is working properly)
3.) The IP ending in .120 cannot be used as its not from the same network range as .100 (when you are using a mask of /29) When you have a correct IP address from same network configured on the standby ASA you should be able to ping it and also see it on the "show arp" command on the ASA
Hi Team, I have one exclusion provided by internal team which is Is it right way to exclude ? *\Program Files\XYZ\* , as per Cisco Docs i see its not recommended because it will create performance issue when we use * at starting , So...
Central Log Management using Cisco Security Analytics and Logging, December 2nd at 8am-9:30am PT
Cisco Security Analytics and Logging is Cisco’s Central Log Management solution for Network Operations and Security Outcomes. It is delivered both as a c...
Cyberattacks are more sophisticated than ever and your online presence has never been more critical to the success of your business. Cisco, through its OEM partnership with Radware, can help secure your digital future by continuously monitoring...