ASDM, 7.19 setup

[Antony_85]

Hi All,

I downloaded the asdm-openjre-7191-90.bin (Cisco Adaptive Security Device Manager for ASA 9.8-9.19 integrated with OpenJRE) BIN file and I have no clue how to execute this.

I did some googling and from what I found you need to burn it to a CD and run it that way. Is there any other way to install this?

Currently, I am running ASDM 7.8 to interface with x4 ASA5508 and ASA5506 devices. I want to set up ASDM access from a new computer and am unable to download java runtime as it’s not free anymore. Asdm-openjre-7191-90 has OpenJRE integrated so I can bypass finding/installing jave runtime.

Regards

Antony

[balaji.bandi]

check the release notes and compatibility matrix : ( you need to upload the .bin file to ASA - how we do same way like old ASDM, here the difference is we use Open JRE)

below document explain you how you can do that)

https://www.cisco.com/c/en/us/td/docs/security/asdm/7_19/release/notes/rn719.html

[Marvin Rhoads]

When you upload the new ASDM image to the firewall(s) (using ftp, tftp, scp or https (e.g. the old ASDM)) and set them to use that image, all subsequent client management connections will use the new ASDM image with the built-in OpenJRE. That includes downloading the necessary files to the PC from the ASA directly.

[jatinsingh19093]

Hi All

Whenever i try o install ASDM from asa 7.20.2 it installs the asdm 7.19.

Don't know the reason

ciscoasa# show asdm image
Device Manager image file, disk0:/asdm-7202.bin
ciscoasa#