asdm ASA 5505

[salar khalid]

Dear 

I can't connect to my device ASA 5505 Firewall 

this device has been configured before, I just try to change my ISP IP which is changed 

I connect my RJ45 to one of the port ( i tried port zero as well ) and put gateway of this port to my ASDM, but the following error appears:

 

[Karsten Iwen]

You can't just use "any" port. You have to use a port that is in the right VLAN and has IP-connectivity to the ASA. And your client-IP has to be authorized to use the ASDM. Try to access the ASA with a browser and https://ASA-IP. If that doesn't load it also can't work in ASDM-Launcher.

[salar khalid]

Thank for response

I have ping to my firewall, but it's not launching in browser, it seems that my client id (port zero ) is not authorized to using ASDM, by the way,  I am connected by console, could you please let me know what is the command that I should write in my console for solving this issue ? 

[Marvin Rhoads]

http <nameif of the ASA address> 0.0.0.0 0.0.0.0

...will allow any hosts to use ADSM via that interface. You can tighten it up by specifying a more specific subnet or host address.