06-29-2011 10:51 AM - edited 03-10-2019 05:23 AM
Hello
I have configured an SSC-5 card in an asa 5505 and everything is working perfectly. One of the things you need to do when configuring is configure allow-ssc-mgmt on the physical int on the asa to allow it manage the AIP card via that network card. Is the same approach used on the AIP SSM modules in the bigger asa's as I cant communicate with the module via asdm. Am I missing something obvious?
Tks
06-29-2011 11:18 AM
What entries do you have in your Allowed Hosts list on the sensor?
06-29-2011 12:10 PM
You can Manage thru ASDM can you give me a clear idea what you are trying to do?
06-29-2011 03:34 PM
hi guys tks for the replies.
the sensor is on another site so I dont have direct access to it but basically if I connect to the asa via the asdm (on the external ip of the asa) and then from within that session if I click on IPS, it wont connect. on the acl on the IPS should I have the IP that I connect to the asa from on it? i.e my public IP? if you can explain to me exactly what happens when you click on the IPS part of asdm? It just establishes a connection to port 443 on the IPS sensor right?
tks
06-30-2011 12:38 PM
First You check
# Sh module
The module is detected the sense.then you can change the ip settings and you can access the IPs directly from ASDM with ips ip.
No need to acces asa(asdm) and access the ips.Let explain indepth if you are still have problem.
Rajeswar.
06-30-2011 12:43 PM
Hi,
I have suggested with other post also same.(same solution is for other post also)
Management IP address :192.168.1.2/24
Management Hosts:192.168.1.0/24
Gateway:192.168.1.1
For Changine the AIP ssc-5 settins Follow the Steps
Login ASA
asa# configure terminal
asa (config)# interface vlan 1
asa (config-if)# no allow-ssc-mgmt
asa(config)# interface vlan 20
asa (config-if)# allow-ssc-mgmt
asa# hw-module module 1 ip 209.165.200.255 255.255.255.224 209.165.200.245
After this you can access the ips directly from asdm .
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide