01-16-2012 06:33 AM - edited 03-11-2019 03:15 PM
Hello,
we replaced our PIX525 firewall with an ASA 5540 firewall, and now we see some strange behavior in ASDM.
ASDM does not display all the rules, but i see all all the rules in cli.
What can be the problem?
inside-asa# show ver
Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 6.4(5)
Solved! Go to Solution.
01-19-2012 09:43 AM
Hello Erik,
Do you think you can do an upgrade to 6.4(7) as this is the recommended version by CISCO when you are running 8.2(5).
Regards,
Julio
01-16-2012 10:44 AM
Hello Erick,
Are you talking just about the ACL rules?
Regards,
07-18-2014 03:52 AM
Yes, just about the ACL rules. We does not use NAT because this firewall is an internal firewall.
01-19-2012 05:08 AM
Hello,
I really need help.
Have somebody else find this problem?
01-19-2012 05:39 AM
In addition, I noticed that the rules under CLI is have different order than the rules in the ASDM.
01-19-2012 09:43 AM
Hello Erik,
Do you think you can do an upgrade to 6.4(7) as this is the recommended version by CISCO when you are running 8.2(5).
Regards,
Julio
01-19-2012 11:34 PM
Sure, i think we can manage that but i can only reply after one or two weeks ( change management ).
But i thought that our ASDM version is OK with this ASA version, see the link,
http://www.cisco.com/en/US/docs/security/asa/asa82/release/notes/asarn82.html#wp309157
Thank you for you help.
01-20-2012 06:46 AM
Thanks for the help, we updated the ASDM software version on a test ASA firewall and everything is OK.
6.4.5(206) is OK too.
01-20-2012 09:13 AM
Hello Erik,
Great to hear that everything is working now.
Have a wonderful day,
Julio
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide