ASDM Traffic Status Window

[Lee Dress]

we recently installed a new fiber internet connection to our ASA 5510.

we installed it to Ethernet 0/2 and labelled it "fiber" since "outside" (Ethernet 0/0) was already in use from our other internet circuit.

my problem is in ASDM, on the device dashboard, there is a screen called Traffic Status.

this screen only shows me "outside" Interface Traffic Usage, which is now null since we are routing everything through the 'fiber' port.

is there a way to modify the ASDM Traffic Status screen to show me 'fiber' Interface traffic usage, so I can really see what is going on?

The way ASDM is showing the old 'outside' interface, it's basically useless.  

Any help would be greatly appreciated. 

Thanks

[Loren Kolnes · Accepted solution]

Hi Lee,

Since the usage statistics will be displayed for the lowest security interface this is expected.

I set this up in the lab and see that same thing, if you change the security level of E0/0 or remove the nameif statement does that help?

Thanks,

Loren

[Lee Dress]

Awesome catch.

I changed outside to Security level 2 and left fiber at 0 and fiber now shows up in the screen.

Thanks..