Auto Update Server to update ASA software

[jacques_henry696]

Hello,

I am using Cisco Security Manager 4.0.1 with the Auto Update installed.

I've configured my firewall with the following commands:

auto-update device-id hardware-serial
auto-update poll-period 1
auto-update server https://*@10.1.0.102/autoupdate source LAN1

(by the way, the username and password you specify in this last command is the one I use to log in to the CSM??)

I've enabled the debugging:

debug auto-update client

and I all get is the following output every 1 minute:

Auto-update client: Sent DeviceDetails to /autoupdate of server 10.1.0.102
Auto-update client: Failed to contact: https://10.1.0.102/autoupdate, reason: HTTP response: Found

And of course the ASA doesn't appear in the Auto Update device list on my CSM server...

What can I do?

thanks!!

[jacques_henry696]

hum, ok I've found why....

The default Auto Update Server URL in 4.0.1 is /autoupdate/AutoUpdateServlet but in the ASDM in which I've configured the AUS, by default it is only /autoupdate ...