Bandwidth Management on ASA 9.1

[firhan.adi]

Hi All,

could you help me, i need configure cisco asa QOS and the rule like below :

i have 3 subnet behind the asa and i need configure QOS with rule like 1 subnet i give 50% bandwidht and 2 subnet i give 25 % each. but if the traffic to internet is empty each subnet can used 100 % bandwidth .

[Karsten Iwen]

That's not possible with the ASA. The QoS features on the ASA are very limited. Do you have control over the WAN-router in front of the firewall? If that's an IOS router it will be possible.

[firhan.adi]

Hi Karsten,

Ok thanks for your explanation

[Tagir Temirgaliyev]

if you can define time range for example from 9-00 till 12-00 when traffic is maximum so you configure time range based  QOS with rule like 1 subnet  give 50% bandwidht and 2 subnet i give 25 % each

in another time it will not work

another option is executing script on some server or router

here is example how to execute eem script on 3750 and ssh to asa

https://supportforums.cisco.com/discussion/12292956/eem-ssh-asa-and-issue-commands

and dont forget to rate post