Network Security

Hi guysI got a problem with an IPS, from some weeks the CPU has been at 100% (all the 4 CPU's) and I don't know why, the Inspection Load is really low and I guess this is not affecting to this. Here some information of the SHOW VERSION command *I als...

Please tell me form where i should start security...and I wana learn both Cisco ASA and checkpoint...What are the requirement if person have to go in DATA Center

Hi,the anyconnect client 2.2x is able to connect to an ASA (8.03) with TLS or DTLS. However, connecting via DTLS, it looks like that the compression is not working. Simply disabling DTLS and reestablish a svc session with protocol TLS, the compressio...

I can't seem to create a static route based on following criteria.  Can anyone help?  ASA 5505 and VPN tunnel is in play:Interesting Traffic = your single host is trying to talk to our side.Will need to create a static, 1:1 policy NAT of interesting ...

Three months ago I bought a new WRVS4400N router and had to update the signatures, but now it's sending me emial telling me to up date the signatures again and I can't find them anywhere on the Cisco site. Is Cisco not offering updated signatures for...

Hi All, Please help on the following queries.There is a FWSM, which has been there for few years and none of us have the passwords.To recover the password,1) Is username & password for maintenance partition always "root" and "cisco"?2) If they can be...

 Hello, can  i get  help  to  configure  the Hide NAT on the ASA 5510 Firewall.Also  the configuration   command   for  the below config.Source IP                             Dest IP                                  Translated Source IP              ...

Hi,Cisco AIP can use syslog or do you have to have a Cisco proprietary log server to interpret the output?  

Hi,I have cisco ASA 5510 8.4 and I want to connect it with TMG (ForeFront Management Getway) as the following  Internet ------ASA-------TMG-------usersWhat is the configurations required to allow traffic outgoing TMG to go the internet through ASA ??...

Hi, The scenario -Clients on the LAN use a public DNS server for their DNS; the local clients must resolve the local email servers IP address as the public IP address, which is performed through NAT. The clients can access email (OWA) when they brows...

i have a firewall CISCO ASA 5510 ,when i am connecting to two sites at a time,the  one site has static ip and other has dynamic ip, it is not connecting to both at a time, if one works the another is not working, pls suggest me to buy a new one that ...

Hi,I am wondering if it is possible to run a dual ASA dual (active) ISP scenario. Here is what I have to work with-ASA 5510 Base-ASA 5505 Sec+-3560 L3 switch-Two separate ISPsWhat I would like to do is setup one ISP to run only voice traffic while th...