Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm seeing this in my log, but everything is working as it should."AD: ISE account password update failed".Everything looks normal under:Administration --> External Identity Sources --> Active DirectoryMy ISE is running 3.4 Patch 6Cisco Bug IDs: CSCw...
Need help to understanding why my pxgrid is not working between Catalyst Center and ISE.Username and password are correct, same with Shared SecretSee the picture
Right now I have a mixed environment with 2960, 1000 series and 9200 switches (I will replace all 2960).When I add the switches to Catalyst Center, the 1000 series is listed as a Third Party Device. Why?It is only cosmetic but annoying..If you click ...
HiI have two WLC 9800 in HA.Active WLC is in server room A Standby WLC is in server room B.RP is connected with direct fiber.Link ports are connected to 9500 switch (one in server room A and one in server room B) between the switches I have a trunk t...
I think you need to add on you 802.1x port:authentication host-mode multi-authWith that command Multiple devices are allowed to independently authenticate through the same port.
Try this1: Test if you can ping your ISE (radius)2: Check shared-secret on Switch and ISE under Network Devices.You should have something like this on you switch:aaa new-modelaaa group server radius ISEserver name ISE1radius server ISE1address ipv4 <...
@ahollifield wrote:Run the AD diagnostics tool and post the results here. Most likely no.I have now run the AD diagnostics tool, and all test results show as Successful.
Thank you for your answer.I’m planning to do that, but will Patch 7 also fix this issue?I’d really like to understand what is causing this issue before I proceed with anything else.
