Network Security

HiIve got a problem launching the ASDM and java.  Now i know there is an issue with more up to date versions of java and the ASDM, but ive had a look around and found that Java version 6 update 7 should work, and to be fair with the other ASA's we ha...

Ok,  I have been out of it for a while, now it is kicking me.Problem.   Have to install a router in a network, with some restictionsall things like SNMP, TACACS, Radius, NTP etc must be set up to use loopback0 as the source.this is on a 2811 router. ...

How to see the ip address of the attack host?Show the loggingJul 19 09:43:15 10.239.67.1 Jul 19 2011 09:43:11: %ASA-4-733100: [ Scanning] drop rate-1 exceeded. Current burst rate is 1 per second, max configured rate is 10; Current average rate is 5 p...

Hello,I have Cisco Router with the below config:ip inspect name SDM_MEDIUM appfw SDM_MEDIUMip inspect name SDM_MEDIUM cuseemeip inspect name SDM_MEDIUM dnsip inspect name SDM_MEDIUM ftpip inspect name SDM_MEDIUM h323ip inspect name SDM_MEDIUM httpsip...

Hi.I have two 2911 routers running 15.0(1)M4 in a redundant topology connected to an ASA 5520 firewall running 8.4 version. All gears are running EIGRP.In order to distribute the incoming traffic between the two 2911 routers, I am using 'offset-list ...

Hello,I have csm 3.3.1 sp3 and fwsm 4.0(4), to monitor the fwsm i am using the device manager from the csm.The problem is that when asdm opens from csm it works for few seconds and csm losses connection to the fwsm.I checked the logs on the fwsm and ...

Hi,Is there a way to have the ASA log the Anyconnect client version that authenticated with an ASA?  I can see in the vpn-sessiondb the client version in realtime there but I want to record via syslog the client version information.- Peter

Dear Support,I'm trying to monitor the health of SSC-5 module in Cisco ASA5505. Currently, no problem monitoring the Interface availability (thru Ping and Interface eth0). However, my Network Monitoring System (NMS) doesn't able to recognize/ capture...

Setting up some snmp monitoring and as I am poking around to figure out what exactly I'd like to get, I run the following commands from my Debian based monitoring host:snmpwalk -v 2c -c Community_String AIP_IPADDRESSsnmpwalk -v 1 -c Community_String ...

Hi,I am trying to implement Authentication for a particular ACL on the ASA, i.e. whenever that particular ACL is matched, the ASA will authenticate the user with either local database or AAA server. I have seen the document "Configuring AAA for cut-t...

Dear Boss Plz see attached diagram. I have Static NAT on ASA 5520 for mail server and proxy server. I can use it from internet. now i want to Static NAT for 192.168.0.0/24. I mean 192.168.0.241-> 172.29.0.5, 192.168.0.242->172.29.0.6 so on. I want wh...