Network Security

Hello ,I have a pix 506 in the network .But the problem that I am facing is that I am not able to get any incomming mails .SMTP and pop3 ports and opened.I have created an access-list for the pop3 and applied to the outside interface of the pix.But e...

Hi !Anyone having any information regarding AES on IOS and PIX platforms ? (at least beta ?)The "AES position paper" states "late 2001" ???Thanks,Michael

Is it possible to reach a PIX firewall remotely using a modem attached to its console port?

Could anyone tell me whether it's possible to establish a vpn tunnel betwen these 2 devices. What emulation should I best use onthe handheld !!!!!Best regards Lars

Hello,how can I change the Pix 501 IP?Both Pix 501 and 3Com Lan Modem have 192.168.1.1Do you know if there are problems usingPix 501 with 3Com Lan Modem?Both have 4 port ethernet hub.I have to change other config params?Thanks to all.Mark.

Hey, I am having trouble setting up a PIX firewall at work. I have setup pdmand have a netword layout for the firewall. I just don't get a reply whenpinging through the outside interface to the internet. I can ping the routerthrough the outside pix i...

How to recover password in PIX 506,515 firewalls?!!

I have an old pix calssie running 5.3(2) with activation key for vpn des 56-bit. Is it possible to do 3-des with this version of software if I get the proper activation key. Let me know. Thanks, Todd.

How do I monitor the traffic going in and out of my PIX firewall 515? In particular denied packets inbound that don't meed any access-lists and where users are surfing outbound to the web?

I have a PIX 515 Firewall with 3 interfaces, (internal, Internet, and DMZ). I have opened conduits between one of the servers in the DMZ and one of the internal servers to allow for Active Directory replication between the two servers, as they are wi...

Websense at HQ. Remote sites with PIX 501/506 split tunneling. Would the "url-cache" command have any benefit, or would we just have to forego URL filtering at remote sites?

I am implementing a VPN solution here at work, we are on 2 bonded T1's and our firewall is a PIX 520. Currently we have around 500 users with maybe half of them outside the office and are needing the use of VPN, if my PIX will handle the load then w...

I have a default install of a pix 525. I can ping from within the firewall to my secure network. I can ping from within the firewall to my non-secure network, but I can not ping from my secure to my non-secure (through the firewall). Is this possib...

We own a Pix 501 Firewall (50 user licence). We don't physically own 50 computers and yet the Pix Firewall is reporting "407001 Licence limit of 50 exceeded" in the log file. Most of our PC's have statically assigned IP addresses (false of habit!!), ...

I read with interest the LAN Based failover enhancements in version 6.2. I have a pair of PIX 515Es (1 x PIX-515E-UR-BUN and 1 x PIX-515E-FO-BUN) and want to run LAN based failover between them. The documentation suggests that I don't need the serial...