Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

One of our customer already has a VPN function in office and for remote users. They are using VPN-SW-DES-100=. Now they would like to upgrade their OS to WinME, Win2000 and XP. But VPN-SW-DES-100= seems cannot support ME and XP. Since the VPN client ...

ayue by Community Member
  • 1395 Views
  • 1 replies
  • 0 Helpful votes

Can one site pass DHCP requests through a VPN to a Server on the other side that is not the Cisco device. The problem I see is getting accepted on the VPN before you have an IP address.

brad by Community Member
  • 2530 Views
  • 1 replies
  • 0 Helpful votes

Can someone explain why I need this for my ADSL connection. I have a ADSL modem configured which I am about to change for a ADSL Router.What's the reason for PPPoE in my firewall ? Thought authentication was done via the Modem/Router.Also what versio...

I would like to know if anyone knows or had previos experience using Pix 506 Firewall with nat and pat of how many user it will stand?Talking with Cisco they told me It can stand 30,000 simultaneos connections. If every user uses a maximum average of...

elepazote by Community Member
  • 2149 Views
  • 5 replies
  • 0 Helpful votes

Hello.. I have a Cisco Pix 506 in a small enterprise network.. (less than 100 nodes).. with 3 remote locations.. my problem is.. I'm using a wireless gateway.. and i can ONLY have 1 outside IP address.. will this affect my PIX.. ppl told me I had to ...

adamf by Community Member
  • 2307 Views
  • 12 replies
  • 0 Helpful votes

I have installed PDM 1.1(2) over six PIX 525, and I have configured nat 0. I was surprised PDM didn´t support nat 0 and static/conduit. Does anyone know if there is another release that supports these features?Thanks in advance

hperez by Community Member
  • 1643 Views
  • 1 replies
  • 0 Helpful votes

I have a network provided by CBeyond (http://www.cbeyond.com). Basically its data over voice (6 lines) and relatively high speed. They run NAT. Authenication on that network can not occur with the Nortel Ethernet Access Client. CBeyond's technical ra...

c.becton by Community Member
  • 2893 Views
  • 2 replies
  • 0 Helpful votes

Quick questions,2 PIX, each having multiple interfaces/networks.Can 2 PIX connected directly to each other on one interface or a router is needed between the 2 PIX in order to route traffic between the networks?What's the main difference of the routi...

zeremy by Level 1
  • 1739 Views
  • 6 replies
  • 0 Helpful votes

current headquarter infrastructure consist of 3 3810's and 1 2610 (firewall) which will be replaced by Pix 506.. I'm wanting to accomplish remote access via POTS. Where do I get the client software?.. and licenses, i need this really quick?.. is the ...

a.frederick by Community Member
  • 1322 Views
  • 1 replies
  • 0 Helpful votes

I have 2 PIX firewalls (PIX_A & PIX_B) on the same subnet (LAN1) and 1 remote PIX attached to LAN2. PIX_A has a private link connection to PIX_R. I have just added PIX_B and configured a static route for traffic bound for the remote LAN2 as follows:r...

jimh by Community Member
  • 1389 Views
  • 1 replies
  • 0 Helpful votes