04-30-2012 01:42 PM - edited 03-11-2019 04:00 PM
I can RDP into this server 2003 on a colo network but I cant browse the internet on it. I need it to be able to pull captcha information. The server is a client of mine and he hosts his website on it via IIS. The site responds fine over http. The config for the firewall is below. I dont know if the IP address matter but I tried to make them coded to show the different IP's. Thanks for the help.
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password
passwd encrypted
hostname koeppelpix
domain-name koeppeldirect.local
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
object-group service RDP tcp-udp
port-object range 3389 3389
access-list outside_access_in permit tcp any host 65.99.xxx.xxx object-group RDP
access-list outside_access_in permit tcp any host 65.99.xxx.xxx eq www
access-list outside_access_in permit tcp any host 65.99.xxx.xxx eq ftp
access-list inside_access_in permit tcp any eq smtp any
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 65.99.xxx.xxx 255.255.255.248
ip address inside 192.168.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm location 192.168.1.2 255.255.255.255 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) 65.99.xxx.xxx 192.168.1.2 netmask 255.255.255.255 0 0
access-group outside_access_in in interface outside
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 65.99.xxx.zzz 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 0.0.0.0 0.0.0.0 outside
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.33 inside
dhcpd dns 206.123.aaa.aaa 206.123.aaa.bbb
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside
terminal width 80
Cryptochecksum:d446b36119af7c14f458d3936522f45f
: end
Solved! Go to Solution.
05-01-2012 01:47 AM
Access-list inside ACCESSin permit tcp any any eq http
04-30-2012 06:00 PM
Traffic initiated FROM the server will hit:
access-list inside_access_in permit tcp any eq smtp any
which only allows smtp (mail) outbound.
I'd try adding an Access Control Entry (ACE) to that access list as follows:
access-list inside_access_in permit tcp any eq http any
...and then give it another try.
05-01-2012 01:47 AM
Access-list inside ACCESSin permit tcp any any eq http
05-01-2012 09:19 AM
I dont know how I missed that. You know when you are working on something for so long and you start getting tunnel vision. I havent tried this yet but I'm 99% sure that is it. Thank you.
05-01-2012 09:41 AM
Just to close this out, yes that was the problem. However, adding the access-list inside_access_in permit tcp any eq http any did not allow browsing. Instead, I just removed the access-group inside_access_in in int inside and it worked right away. I cant see any reason why that ACL exists can you guys?
05-01-2012 09:47 AM
Glad it's working now.
At one point someone only wanted mail to be the only permissible traffic initiated from the inside.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide