Hi,
We upgraded NFVIS to be able to change the value of "Serial console" to true for all our images, but we are still unable to access any ISRv or ASAv console from NFVIS. We tried it on several different ENCS and it always ends with a console freeze, which forces us to restart the system.
We are unable to access the console of an ISRv or an ASAv on our ENCS. Firstly, we had the following error:![Screen Shot 2018-01-10 at 10.26.36.png Screen Shot 2018-01-10 at 10.26.36.png](https://community.cisco.com/t5/image/serverpage/image-id/6074i5A038AD7E19E58AB/image-size/medium?v=v2&px=400)
To be able to enable the serial console, we upgraded NFVIS and created a new image with the correct setting. Now, when trying to get the console, our complete system freeze.![Screen Shot 2018-01-10 at 10.43.38.png Screen Shot 2018-01-10 at 10.43.38.png](https://community.cisco.com/t5/image/serverpage/image-id/6075iE8CD6B60B4813C14/image-size/medium?v=v2&px=400)
Look like we are connected, but it's impossible to write anything. Ctrl-C doesn't let us go back to NFVIS and the session is saved so even if we kill the SSH process and start a new one (or use the physical console access), we return in the same state.
Thank in advance for your help.
- Plateforme: ENCS 5406/k9
- NFVIS: 3.6.2-FC3