08-26-2021 05:41 PM
I'm really confused here. I can't enable multiple contexts on the ASA. What am I doing wrong here?
ciscoasa# config t
ciscoasa(config)# mode multiple
^
ERROR: % Invalid input detected at '^' marker.
ciscoasa(config)# mo?
configure mode commands/options:
monitor-interface mount
exec mode commands/options:
more
ciscoasa# show version
Cisco Adaptive Security Appliance Software Version 9.8(4)22
Firepower Extensible Operating System Version 2.2(2.124)
Device Manager Version 7.8(2)
Compiled on Fri 29-May-20 00:38 PDT by builders
System image file is "boot:/asa984-22-smp-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 47 mins 51 secs
Hardware: ASAv, 2048 MB RAM, CPU Xeon E5 series 2099 MHz,
Model Id: ASAv10
Internal ATA Compact Flash, 8192MB
Slot 1: ATA Compact Flash, 8192MB
BIOS Flash Firmware Hub @ 0x0, 0KB
0: Ext: Management0/0 : address is 5000.0016.0000, irq 11
1: Ext: GigabitEthernet0/0 : address is 5000.0016.0001, irq 11
2: Ext: GigabitEthernet0/1 : address is 5000.0016.0002, irq 10
3: Ext: GigabitEthernet0/2 : address is 5000.0016.0003, irq 10
4: Ext: GigabitEthernet0/3 : address is 5000.0016.0004, irq 11
5: Ext: GigabitEthernet0/4 : address is 5000.0016.0005, irq 11
6: Ext: GigabitEthernet0/5 : address is 5000.0016.0006, irq 10
7: Ext: GigabitEthernet0/6 : address is 5000.0016.0007, irq 10
License mode: Smart Licensing
ASAv Platform License State: Unlicensed
No active entitlement: no feature tier and no throughput level configured
*Memory resource allocation is more than the permitted limit.
Licensed features for this platform:
Maximum VLANs : 50
Inside Hosts : Unlimited
Failover : Active/Standby
Encryption-DES : Enabled
Encryption-3DES-AES : Enabled
Security Contexts : 0
Carrier : Disabled
AnyConnect Premium Peers : 2
AnyConnect Essentials : Disabled
Other VPN Peers : 250
Total VPN Peers : 250
AnyConnect for Mobile : Disabled
AnyConnect for Cisco VPN Phone : Disabled
Advanced Endpoint Assessment : Disabled
Shared License : Disabled
Total TLS Proxy Sessions : 2
Botnet Traffic Filter : Enabled
Cluster : Disabled
Serial Number:
Image type : Release
Key version : A
Configuration last modified by enable_15 at 00:22:32.619 UTC Fri Aug 27 2021
ciscoasa#
Solved! Go to Solution.
08-26-2021 11:16 PM
08-26-2021 05:51 PM
08-26-2021 11:16 PM
08-27-2021 04:35 AM
as @Milos_Jovanovic mentioned the ASAv does not support the multi-context features. with the virtual appliances you only do a active standby setup. in order for you to have a multi-context you need a physical firewall.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide