02-18-2021 06:14 AM
Dear All,
We are facing some problem with creating FTD container instance on 4140 Platform ...Attached here is
error message..
Appreciate your prompt support .....
Regards
Solved! Go to Solution.
02-20-2021 10:59 AM
Thanks, Marvin Rhoads for your reply,
Actually, we are deploying the FTD 4140 series from the Scratch i-e default setup we have.
So you are suggesting removing the default native instance in order to assign resources to the different instances as per our requirement.
Reply Plz
02-18-2021 07:51 AM
The error refers to a native instance. Do you have a native instance defined on the 4140 already? That cannot coexist with containers as a native instance takes all of the chassis resources.
02-20-2021 10:59 AM
Thanks, Marvin Rhoads for your reply,
Actually, we are deploying the FTD 4140 series from the Scratch i-e default setup we have.
So you are suggesting removing the default native instance in order to assign resources to the different instances as per our requirement.
Reply Plz
02-20-2021 10:04 PM - edited 02-20-2021 10:05 PM
The last 4100 series I setup from scratch (just a couple of weeks ago) did not have any logical device instance when it was new out of the box. In any event, you must have either a native instance (one only) or container instance(s) (1 or more). The two types cannot coexist on a Firepower 4100 series appliance.
02-20-2021 11:31 PM
Dear Marvin Rhoads,
Good Day.
Agreed we need either to go with Native ( Single ) or Container ( Multi-Instance ).
Our requirement is to go with Container (Multi-Instance), So can you guide what steps we need to process.
Regards
02-21-2021 06:12 AM
@Nuhu_20071 Cisco has a very thorough and comprehensive guide documented here:
Since you appear have have a naive instance already created, you should delete it first and then follow the guide.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide