ā01-13-2012 11:03 AM - edited ā02-21-2020 04:32 AM
I hate feeling stupid but I can't seem to SSH
lines entered
interface Management0/0
nameif management
security-level 100
ip address 10.1.0.194 255.255.0.0 standby 10.1.0.193
management only
management-access management
crypto key generate rsa modulus 1024
ssh 10.1.6.18 255.255.255.255 management
ssh timeout 10
ssh version 2
I'm using SSH Client 5.X
username asa password xxxxxxx
I receive a failed connection.
This should be super simple but I've got to be mising something,
Thanks
ā01-13-2012 01:11 PM
Your configuration will require your network's routing to present the SSH packets from your source host at 10.1.6.18 to the ASA's management interface,
It seems odd to have the management VLAN's Layer 3 set up as a /16 (255.255.0.0). Is that your intention? If so, you will need to have that consistently set on the VLAN's gateway. Otherwise ARP will not resolve the MAC of your Management0/0 interface.
ā01-19-2012 09:11 PM
Hello,
Do you have the aaa authentication ssh console LOCAL?
Where is the connection failed, do you get any promts?
Regards,
Julio
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide