change mac address on pix 506 SW 6.1(1)

[peter.fuchs]

hi

i'm looking for the commands to change the mac address on the

ethernet 0 interface on a customers pix firewall.

Thanks for help

sh vers

Cisco PIX Firewall Version 6.1(1)

Hardware: PIX-506, 32 MB RAM, CPU Pentium 200 MHz

Flash i28F640J5 @ 0x300, 8MB

BIOS Flash AT29C257 @ 0xfffd8000, 32KB

0: ethernet0: address is 0005.328f.c292

1: ethernet1: address is 0005.328f.c293

[ajagadee]

Hi,

You cannot change the mac address of an interface on the pix firewall.

Regards,

Arul

[bs0000554]

Dear Peter,

You cannot change whit the PIX 506, but whit a 515 or 515E failover and Sw 6.22 you can choose what MAC address you want to use

[peter.fuchs]

Thanks a lot to all who answered.

I bypassed that matter by changing the mac address entry at the cable provider.

greetings

peter