05-12-2024 02:58 AM
how can we change the management IP in FTD by FDM (locally managed)?
Solved! Go to Solution.
05-12-2024 03:12 AM
Thanks all,
the only way is by cli as below command
configure network ipv4 manual <IP> <mask> <Gateway>
05-12-2024 03:01 AM
It think it better to change IP from CLI
MHM
05-12-2024 03:03 AM
@Sudqi to change IP address of the management interface you use the configure network command from the CLI https://www.cisco.com/c/en/us/td/docs/security/firepower/720/fdm/fptd-fdm-config-guide-720/fptd-fdm-get-started.html#concept_7DA124053BC84D67AB6C402A04635C9C
If you are managing the FDM using a data interface then you have to change that via the GUI.
05-12-2024 03:12 AM
Thanks all,
the only way is by cli as below command
configure network ipv4 manual <IP> <mask> <Gateway>
05-12-2024 03:19 AM
You are so welcome
MHM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide