Changing Standard Syslog Port in ASA

[haithamnofal]

Hi There,

I have a syslog server which is listening on non-standard syslog UDP 514 port. I need to configure my ASA to send to a different port #.

I recall in version 6.3, the fixup command was used to change non-standard ports. I wonder how can this be configured on versions 7.x & 8.x?

Thanks,

Haitham

[cisco24x7]

CiscoPix(config)# logging host inside 10.0.0.20 udp/2550

CiscoPix(config)#

CCIE Security