Cisco 1941 IOS IPS error

[cco4mike1]

Hi,

I'd currently experimenting with IOS based IPS and want to see if it's relevant for my customer. Im configuring it through Cisco Configuration Professional version 2.6 and using downloaded signature sigv5-SDM-S724.zip and the public key loaded as per all documentation suggests. As I finalise with interfaces and all setup parameters in CCP, as I deliver the config to the router I notice the error-

%IPS-3-SIG_UPDATE_REQUIRED: IOS IPS requires a signature update package to be loaded

Any help would be much appreciated.

[Luis Silva Benavides]

Hi,

Could you please load the Signature again but via CLI either using FTP or TFTP

copy ftp:/// idconf

Note: Please remember to use the `idconf' parameter at the end of the copy command.

Do you see any other issue?

HTH

Luis Silva

"If you need PDI (Planning, Design, Implement) assistance feel free to reach"

http://www.cisco.com/web/partners/tools/pdihd.html

[Luis Silva Benavides]

You can find the lastest signature here:

http://tools.cisco.com/squish/a7A00

HTH

Luis Silva

"If you need PDI (Planning, Design, Implement) assistance feel free to reach"

http://www.cisco.com/web/partners/tools/pdihd.html