I need help
Before – working no probs
at the moment my router is my dsl connection and then a point to point link between the router and the switch with ospf routing.
I'm trying to put a routed asa 5520 between my router and switch for added protection as you do...
I can get the links up and running and ospf routing between the router and the asa, however when I enable the switch side the asa becomes extremely slow and almost unresponsive not sure what is happening there and I can't get any http traffic to pass. I have a any any rule on the interfaces so that shouldn't be stopping it, the asa is passing the ospf routing to the router as I can see the routes..
i'm hitting my head against the wall so to speak any assistance would be greatly appreaciated
here are snippets of the relevant parts of the configs
-------------------------------------------------------------------------------
router
interface Loopback0
description --- Loopback ---
ip address 10.100.0.1 255.255.255.255
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly in
interface GigabitEthernet0/1
ip address 10.0.1.1 255.255.255.252
no ip redirects
no ip unreachables
no ip proxy-arp
ip nbar protocol-discovery
ip flow ingress
ip flow egress
ip nat inside
ip virtual-reassembly in
duplex full
speed 1000
no mop enabled
hold-queue 0 in
router ospf 1
router-id 10.100.0.1
log-adjacency-changes detail
network 10.0.0.0 0.0.0.255 area 1
network 10.0.1.1 0.0.0.0 area 1
network 10.0.1.0 0.0.0.3 area 1
network 10.0.99.0 0.0.0.15 area 1
network 10.100.0.1 0.0.0.0 area 1
-------------------------------------------------------------------------------
ASA
-------------------------------------------------------------------------------
ASA# sh run
Saved
:
ASA Version 8.4(2)
!
hostname ASA
domain-name domain.com
names
!
interface GigabitEthernet0/0
speed 1000
duplex full
nameif outside
security-level 0
ip address 10.0.1.2 255.255.255.252
!
interface GigabitEthernet0/1
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/3
speed 1000
duplex full
nameif inside
security-level 100
ip address 10.0.11.1 255.255.255.252
!
interface Management0/0
speed 100
duplex full
nameif management
security-level 0
ip address 10.1.0.3 255.255.255.0
!
boot system disk0:/asa842-k8.bin
ftp mode passive
clock timezone AEST 10
clock summer-time AEDT recurring 1 Sun Oct 2:00 1 Sun Apr 3:00
object-group icmp-type Ping
icmp-object echo
icmp-object echo-reply
icmp-object unreachable
access-list outside_access_in extended permit ip any any log
access-list outside_access_in extended permit tcp any any eq www
access-list inside_access_in extended permit ip any any log
access-list inside_access_in extended permit tcp any any eq www
access-list global_access extended permit ip any any
pager lines 24
logging trap errors
logging host inside 10.27.134.28
logging host inside 10.55.7.94
mtu outside 1500
mtu inside 1500
mtu management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp permit any outside
icmp permit any inside
asdm image disk0:/asdm-645-206.bin
asdm history enable
arp timeout 14400
access-group outside_access_in in interface outside
access-group inside_access_in in interface inside
access-group global_access global
!
router ospf 1
router-id 10.0.11.1
network 10.0.1.2 255.255.255.255 area 1
network 10.0.1.0 255.255.255.252 area 1
network 10.0.11.1 255.255.255.255 area 1
network 10.0.11.0 255.255.255.252 area 1
log-adj-changes
!
route outside 0.0.0.0 255.255.255.255 10.0.1.1 1
route inside 10.0.0.0 255.0.0.0 10.0.11.2 1
route management 10.122.0.200 255.255.255.255 10.122.0.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ (inside) host 10.122.0.10
key *****
aaa-server TACACS+ (inside) host 10.122.0.20
key *****
user-identity default-domain LOCAL
aaa authentication enable console TACACS+ LOCAL
aaa authentication http console TACACS+ LOCAL
aaa authentication ssh console TACACS+ LOCAL
aaa authentication telnet console TACACS+ LOCAL
aaa authorization command TACACS+ LOCAL
aaa accounting command TACACS+
http server enable
http 10.122.0.200 255.255.255.255 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet 10.122.0.200 255.255.255.255 management
telnet timeout 5
ssh 10.122.0.200 255.255.255.255 management
ssh timeout 5
ssh version 2
console timeout 0
threat-detection basic-threat
threat-detection statistics host
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username admin password <removed> privilege 15
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect icmp
inspect http
class class-default
user-statistics accounting
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email callhome@cisco.com
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:64d0fef2ddc6fddf66f51f3f1da15d78
end
-------------------------------------------------------------------------------
Switch
interface Loopback0
ip address 10.100.0.2 255.255.255.255
interface GigabitEthernet0/1
no switchport
ip address 10.0.11.2 255.255.255.252
logging event link-status
logging event trunk-status
logging event status
power inline never
speed 1000
duplex full
flowcontrol receive desired
router ospf 1
router-id 10.100.0.2
log-adjacency-changes detail
redistribute connected
network 10.0.1.2 0.0.0.0 area 1
network 10.0.11.0 0.0.0.3 area 1
network 10.122.0.0 0.0.0.255 area 1
network 10.27.0.0 0.0.0.255 area 1
network 10.38.0.0 0.0.0.255 area 1
network 10.41.0.0 0.0.0.255 area 1
network 10.52.0.0 0.0.0.255 area 1
network 10.68.0.0 0.0.0.255 area 1
network 10.79.0.0 0.0.0.255 area 1
network 10.100.0.2 0.0.0.0 area 1
ip route 0.0.0.0 0.0.0.0 10.0.11.1
-------------------------------------------------------------------------------
Thanks for your time and effort.
