Cisco 3745, VPN and Split Tunneling

[mmcghee1]

I tried following the model here: http://www.cisco.com/en/US/netsol/ns340/ns394/ns171/ns27/networking_solutions_white_paper09186a008018914d.shtml

but after doing so, the situation was actually reversed. While connected to the vpn client you were able to browse the internet but not able to access vpn resources. I undid and redid the configuration several times to rule out keying in problems.

Can one help with this problem... If needed Ill post necessary configs from my router.. Thanks

(btw: do these froms have a search?)

[mhussein]

Hello,

I susptect that the acl is misconfigured. Could you post the configs please?

(And yes, the search box is on top right corner, you can search the last 3 years posts)

Regards,

Mustafa

[pschneider]

I am having the same problems with pix 501. With split tunnel, I get web but no lan access. Without split tunnel, full lan access, no web. My acl for the splitTunnel is:

permit ip host 192.168.1.0 any

Is this wrong?