Cisco 5516x- after copy anyconnect-win-4.10.00093-webdeploy-k9.pkg INFO: No digital signature found

[Alex Ribas]

Hi All

After copied

Accessing tftp://1xxxxx/anyconnect-win-4.10.00093-webdeploy-k9.pkg...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Writing file disk0:/anyconnect-win-4.10.00093-webdeploy-k9.pkg...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
INFO: No digital signature found  <---- Message

Any ideia why?

thank you

[Marius Gunnerud · Accepted solution]

The signature would be used to verify the image.  Not sure if this is a bug as I have been unable to find any related documentation for it, but I assume that it might have something to do which how the image is packaged by Cisco (I get the same error).  To verify the image use the verify command from the CLI and compare the hash with the hash found on the Cisco download site for the image you are downloading.

[Alex Ribas]

I think is a bug

Because I validate and looks like fine

verify /md5 disk0:/anyconnect-macos-4.10.00093-webdeploy-k9.pkg de0796df1355ecd859285fe8924dd5f3

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Done!
Verified (disk0:/anyconnect-macos-4.10.00093-webdeploy-k9.pkg) = de0796df1355ecd859285fe8924dd5f3
FW0001# de0796df1355ecd859285fe8924dd5f3  <---the same wesite cisco

Thank you.

[Marius Gunnerud · Accepted solution]

Glad to help out.

Please remember to rate and/or select correct answers.

[Marvin Rhoads]

I got the same error when copying to an ASA 5506-X running ASA software 9.15(1)7. It occurs whether I use tftp or ftp copy methods. The copied file does check out fine though.

Interestingly I don't get the error when copying to an ASAv running 9.15(1).

I also do not get any error when uploading to an FMC and then deploying to a Firepower 1140 appliance running FMC/FTD 6.7.0.1

[Ced W]

Hi,

 I am having the same issue on ASA 5525x but it does not copy over, the hash checks out fine. 

How do I still get the ASDM .bin file to transfer over ...?

Accessing tftp://x.x.x.x/asdm-openjre-7161-150.bin...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Verifying file disk0:/asdm-openjre-7161-150.bin...
%WARNING: Signature not found in file disk0:/asdm-openjre-7161-150.bin.

BORDER-ASA#

[Marius Gunnerud]

run the cli command verify disk0:/asdm-openjre-7161-150.bin

does it still produce the error or does it give the correct or incorrect hash?

[Ced W]

It does not transfer over to be able to run the "verify" command. It does not show in "sh disk0"
 
Accessing tftp://x.x.x.x/asdm-7161-150.bin...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Verifying file disk0:/asdm-7161-150.bin...
%WARNING: Signature not found in file disk0:/asdm-7161-150.bin.

BORDER-ASA# verify disk0:/asdm-openjre-7161-150.bin
%ERROR: Not able to process Signature in disk0:/asdm-openjre-7161-150.bin.
BORDER-ASA#

[Ced W]

@Marius Gunnerud @Marvin Rhoads @Alex Ribas 

Sorry sorry sorry, I miss read the article below. We have a 5525x and it's on the latest version it can handle for the ASA image and I was mistakenly trying to upgrade to an ASDM module that was higher than it can handle. Sorry for wasting your time. I have not received the correct software but I am sure that will fix it. thank you for taking the time to provide an assist @Marius Gunnerud 

https://www.cisco.com/c/en/us/td/docs/security/asa/compatibility/asamatrx.html#reference_upj_nkl_x4b