Cisco 6500 ASA Module

[GlobalTechInc]

Greetings,

I have 6509-E switch with Cisco ASA module, I have two network segments 1. 10.60.5.0/24        2. 10.60.6.0/24, the ASA module is gateway for my two subnets, routing protocol is cisco EIGRP, everything looks normal, but when I am trying to copy files from one computer which has the IP 10.60.6.21 to another computer which has the IP 10.60.5.100 in another network subnet, they latency goes high and copying is very slow.

Please help me.

[Vibhor Amrodia]

Hi,

I think the easiest test would be to check for any inspections for the traffic that you are using for the test on the ASA device.

Also , you can try this:-

http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/111986-asa-tcp-bypass-00.html

Thanks and Regards,

Vibhor Amrodia