03-02-2012 02:18 AM - edited 02-21-2020 04:34 AM
Hello,
i have cisco 880 with NPE licence, but i need encryption on this device. I change IOS to c880data-universalk9-mz.151-3.T1.bin, but i still have NPE License and only Evalution without NPE. How can i have permanent license?
thanks.
show license all
License Store: Primary License Storage
StoreIndex: 0 Feature: advsecurity_npe Version: 1.0
License Type: Permanent
License State: Active, Not in Use
License Count: Non-Counted
License Priority: Medium
StoreIndex: 1 Feature: advipservices_npe Version: 1.0
License Type: Permanent
License State: Active, Not in Use
License Count: Non-Counted
License Priority: Medium
License Store: Evaluation License Storage
StoreIndex: 0 Feature: advipservices Version: 1.0
License Type: Evaluation
License State: Inactive
Evaluation total period: 208 weeks 2 days
Evaluation period left: 208 weeks 2 days
License Count: Non-Counted
License Priority: Low
StoreIndex: 1 Feature: advipservices Version: 1.0
License Type: Evaluation
License State: Inactive
Evaluation total period: 208 weeks 2 days
Evaluation period left: 208 weeks 2 days
License Count: Non-Counted
License Priority: Low
StoreIndex: 2 Feature: advipservices Version: 1.0
License Type: Evaluation
License State: Active, In Use
Evaluation total period: 208 weeks 2 days
Evaluation period left: 208 weeks 1 day
Expiry date: Mar 24 2016 17:24:32
License Count: Non-Counted
License Priority: Low
03-02-2012 05:22 PM
Download the filename with the "k9" in it. This means the IOS will support crypto.
03-04-2012 10:33 PM
yes, thank you. but it does not work for IOS 15.X.
is it possible with IOS 15?
thanks.
10-24-2012 02:38 AM
Hi Bullfinch,
At the moment we are facing the same issue.
Can you share your experience on this with us? It could be very helpfull for the coming days.
Many thanks.
Regards,
Thomas
12-08-2013 03:53 PM
you need new license file from Cisco for advipservices (Cisco 897VA comes with advipservices by default)
send the below details to Cisco licensing team and request for new licese file
Router#show license udi
Once you have the new lic file from Cisco - copy it to router flash and type below command to active it
Router#license install flash:
Installing licenses from "flash:
Installing...Feature:advipservices...Successful:Supported
1/1 licenses were successfully installed
0/1 licenses were existing licenses
0/1 licenses were failed to install
Router#
once done - reload the router.
Hope this helps
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide