Cisco ASA 5512-x has problem with mulit Wan(ISP)

[rechard_david]

Dear All,

I have Cisco ASA 5512-x and have 3 ISP. i don't know how to confiure on ASA 5512-x with muliple ISP. all 3 ISP i would like to active the same time.

Could you advice or have some idea?

Please help!!!

Best Regards,

Rechard

[Julio Carvajal]

Hello,

That is not possible unless all of them go out the same interface ( witch is not going to happen )

You cannot have more than one route pointing to the same destination going out on different interfaces and active at the same time.

Sorry to inform you that , you could use SLA but is for redundancy purposes

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtml

Regards

[rechard_david]

Dear Jcarvaja,

Thank you for you advice!

you mean ASA 5512-x cannot do Active multive Wan connection right? but it can do only Active/Stand Wan ....

Is it possible if i have other vender (Pep Link) for connect to internet and the lan Pep link connect to ASA ?

I mean that All (3 ISP) connect to Pep link for load balacing and Pep link connect to ASA 5512-x and ASA 5512-x connet to my Lan.

Best Regards,

Rechard.

[rechard_david]

Dear All,

Do you have any update or advice on this?

Best Regards,

Rechard